Home > AR COMPONENTS
Choose a sub category:
80% LOWER RECEIVER AR10 Hand Guards AR15 Hand Guards
BARRELS FLASH GUARDS GAS BLOCKS GAS TUBES BOLT CARRIER GROUPS/CHARGE HANDLES BUTT STOCKS PISTOL GRIPS FORWARD GRIPS
LOWER RECEIVER PARTS LOWER RECEIVERS Magazines
UPPER RECEIVER PARTS UPPER RECEIVERS
Sort By:
Page of 2
AR15 A2 Pistol Grip

Mil-Spec Pistol Grip. Available in Black or Desert Tan

Our Price: $4.95
AR15 Enhanced Pistol Grip

Mil-Spec Pistol Grip with Storage Compartment in base of Grip.  Available in Black of Desert Tan.

Our Price: $9.95
AR15 A2 Muzzle Brake

Muzzle Brake with Crush Washer. 1/2x28 Muzzle Thread Fit most 5.56 or 223 WYLDE Barrels.

Our Price: $10.50
AR15 Dust Cover Kit

Mil-Spec Dust Cover Kit. Kit includes all components needed to install Dust Cover on your striped Upper Receiver. We also offer a complete Upper Receiver build kit which includes Forwards Assist and Dust Cover.

Our Price: $11.50
Enhanced Ambi Safety Selector

The Ambi Safety Selector can be installed on any standard AR15 Lower Receiver. The Safety Selector can be deployed on either Right or Left side of the Rifle. The Right Side lever has been shortened to accommodate right-Handed shooters. .

Our Price: $19.95
AR15 Ergo Pistol Grip

The Original Ergo Grip, designed for performance creates a better interface between the shooter and firearm. The Ergo Grip is still the standard by which positive grip and shooter comfort are measured. The Ergo Grip comes with the patented Gapper™ for increased comfort.Mil-Spec Pistol Grip.

Our Price: $24.95
Low Profile "Hammer Grip"

The Hammer Grip features a low profile and recessed hand groves to accommodate a wide variety of shooting styles and positions. Oversized Palm well improves weapon leverage. The Hammer Grip mounts directly to any KeyMod Hand Guard. The front wedge acts as a angle grip and the back stop allows for the compact profile. The Skeleton design keeps unnecessary weight off of the Rifles front end while adding strength to the Hammer Grip.

  • One Piece Aluminum Construction
  • Mounts Directly to ant KeyMod Hand Guard
  • Oversized palm well for improved weapon leverage
  • Light weight Skeleton Design

Our Price: $24.95
AR15 Hogue Pistol Grip

Hogue rubber grips are molded from durable synthetic rubber that is neither spongy nor tacky yet provides a soft recoil absorbing feel, without affecting accuracy. This modern rubber requires a completely different molding process than ordinary neoprene, which results in a superior grip. The flexibility of our materials and molding process has allowed us to produce rubber grips with features that outperform all other makes. Options available: with or without finger grooves, with CMS storage kit/Samson field and beavertail option.Hogue AR15 Overmolded Rubber Grip with Finger Grooves.

Our Price: $24.95
AR 15 Tactical Charge Handle

AR 15 Tactical Charge Handle. Extended Bolt Release provides Additional Clearance when Optics are used.

  • 6061 Aluminum Forging
  • Hard-coat Anodized Finish
  • Extended Bolt Release Catch.

Our Price: $26.50
Premium Flip-Up Sight Set

The Aluminum and Steel Flip-up Sight Set is used as for both back-up and primary sighting. The Flip-up Sight Set pivots up for deployment and is locked in the up position automatically. Depress side button to fold sights down. Forward Flip-up Sight allows for elevation adjustment with knurled knob for Rear Sight windage adjustment. Rear sight also has dual sight Pep O-Rings for easier target acquisition. Flip-up Sights mount directly to any Picatinny rail system and secured using the cross bolt clamp system.

  • Aluminum and Steel Construction
  • Rear Sight Windage Adjustment
  • Rear Sight Dual Pep O-Rings
  • Front Sight Elevation Adjustment
  • Mounts to any Picatinny Rail System
  • Black Anodized Finish

Our Price: $34.95
Gen II Mil-Spec Butt Stock Kit

Complete 6 Position Butt Stock with Buffer Tube, Butt Plate, Castle Nut, Buffer Spring and Buffer. Removable and 2 Point Adjustable Sling Mount.  Available in Black of Desert Tan.

Our Price: $39.95
Anderson Striped Lower Receiver

Striped Lower Receiver delivers Custom Shop quality without the typical Custom Shop price.  Made from 7075 T6 aluminum. Mil-Apec Hard Anodized.  Precision Machined to ensure drop-in installation of Mil-Spec aftermarket components.

Our Price: $44.95
ar15 butt stock AR15 Mil-Spec Socom Butt Stock Kit

Our Mil-Spec SOCOM Design has a Widened Cheek Area which provides Stability when Sighting in. The Rubber Butt Pad adds comfort from Recoil. There are also Sealed/Removable Storage Tubes in the Butt Stock.

  • 6 Position SOCOM Butt Stock
  • Widened Cheek Rest
  • Rubber Butt Pad
  • Mil-Spec Carbine Buffer and Buffer Tube
  • Back Plate and Castle Nut
  • Sealed Storage Tubes in Butt Stock
  • Available in Black or Tan

Our Price: $49.95
Adjustable .750 Low Profile Gas Block

Low Profile .750 Diameter Adjustable Steel Gas Block. Gas Blocks are CNC Machined in the USA from Cold Rolled Steel. Gas Block is fully adjustable via screw with 20 Points of adjustment. Simple Adjustment from Side of Gas Block. .750 Barrel diameter with Black Phosphate Finish.
We also stock Stainless Steel Gas Tubes in Pistol, Carbine, Mid, Intermediate and Rifle Length Gas Tubes.

  • .750 Barrel Diameter
  • CNC Machined
  • 20 Point Adjustment
  • Low Profile

Our Price: $52.95
Matrix Arms M15 Striped Lower Receiver

Designed with quality and durability in mind, the Matrix Arms M15 striped lower receivers are CNC Machined American made mil-spec 7075 T-6 aluminum forging. They utilize a standard .250 take down/pivot pin hole and standard .156.fire control pins. Lower Receivers have a Hard Coat Anodized Finish. Mil-Spec picatanny rails with laser T-Markings.
Proudly Made in the USA

  • 7075 T6 Aluminum Forging
  • CNC Machined
  • .250 Take Down/Pivot Pin Holes
  • .156 Fire Control Pin Holes
  • T-Marked Picatanny Rails

Our Price: $55.00
LUTH-AR Cheek Plate Assembly

The LUTH Cheek Plate Assembly adapts to the MBA-4 Carbine Stock. This assembly will add up to 1 inch height to the Cheek Rest. Made of a Glass-Filled Nylon for added strength. We use the LUTH MBA-4 Butt Stock with Cheek Plate Assembly on our VARMINT Platform.

Complete Cheek Plate Assembly to add on to your MBA-2 or MBA-4 stock for extra rise to the top of your stock includes:

  • 1 Cheek Plate – RL-005
  • 1 Lockplate – RL-010
  • 1 Steel Thumb Screw – TS-01
  • 1 Thumb Screw Hex Nut 1/4-20 Black – HN-01
  • 1 Thumb Screw Star Lock Washer – TSW-01
  • 1 MBA-1/2 Side Plate – RL-0011
  • 1 MBA-3/4 Side Plate
  • 2 Side Plate Button Head Cap Screws 8-32×3/4 – SCW-02
  • 2 Side plate/Stop Nut Nyloc Nut 8-32 Black – HN-02
  • Available in Black, FDE and Pink

Our Price: $59.95
Aero Precision X15 Striped Upper Receiver

Aero Precision X15 Striped Upper Receiver offers High Quality at a reasonable price.  Precision Machined to Mil-Spec from 7075 T6 aluminum forgings. Features M4 Feed Ramps. Can be used for Multiple Calibers on the AR15 Platform.  Hard Coat Anodized finish.  Rail is white laser "T" markings.  Also available with Dust Door and Forward Assist Installed.

Our Price: $59.95
Aero Precision Gen ll Lower Receiver Set

Aero Precision Gen ll Striped Lower Receiver delivers Custom Shop quality without the typical Custom Shop price.  Made from 7075 T6 Aluminum. Mil-Spec Hard Coat Anodized.  Precision Machined to ensure drop-in installation of Mil-Spec aftermarket components.

Our Price: $59.95
LUTH AR MBA-4 Carbine Butt Stock

The MBA-4 Carbine Stock is a revolutionary designed stock. Fully adjustable coupled with Light Weight and affordability. Made of a Glass-Filled Nylon for added strength. The LUTH MBE-4 will work with either Mil-Spec or Commercial 6 position Buffer Tubes. The MBA-4 can be upgraded with Cheek Plate and Butt Plate Assembly. Available in Black of FDE. Please email us for additional information. We use LUTH MBE-4 Butt Stocks on our VARMINT AR15 Rifle.

  • Light weight stock to mount to a carbine rifle (6-positions mil-spec or commercial tube) – This is our carbine skullaton stock
  • Fits all .223 and most .308 AR carbine style rifles
  • Super Strong Glass Filled Nylon
  • 21st century look
  • Ergonomic
  • Easy to replace and quick to install
  • Uses 4 out of the 6 positions on a mil-spec or commercial tube

Our Price: $66.75
AR15 Copetition Muzzle Brake

Competition Style Muzzle Brake was designed with the competitive shooter in mind. Solid CNC construction and Nitrite Finish. Side and Top Ports reduce Recoil and Muzzle Rise. These are excellent Muzzle Brakes and is one of the best Bang for the Buck Muzzle Brake you can buy. Available in 1/2x28 or 5/8x24.

  • CNC Construction
  • 4 Top Ports
  • 6 Side Ports
  • Available in 1/2x28 and 5/8x24

Our Price: $69.50
MagPul MBUS Back-Up Sight Set

MagPul MBUS Sight Set is adjustable for Windage and Elevation. Spring Loaded for quick deployment and easily Folds Down when not needed. Fits 1913 Picatinny Rail Systems.

  • Spring Loaded Deployment
  • Easy Fold when not needed
  • Fits 1913 Picatinny Rail Systems
  • Lightweight Reinforced Polymer Construction
  • Available in Black, FDE or ODG

Our Price: $74.95
223/5.56/Blackout Bolt Carrier Group

223/5.56/Blackout Bolt Carrier Group. Includes Bolt, Bolt Carrier, Cam Pin, Extractor and Firing Pin.

  • Carrier Machined fro 9310 Steel
  • Nitrite Treated Bolt Carrier
  • Chrome Lined Gas Key
  • Torqued and Staked Gas Key
  • Bolt Machined fro 9310 Steel
  • MPI Tested Bolt
  • Chrome Firing Pin

Our Price: $79.95
Hogue Butt Stock with Buffer Kit

HOGUE Rubber OverMolded Butt Stock Kit. Reinforced polymer construction with OverMold rubber cheek rest. Robber/polymer hybrid Butt Pad provides snag-free rifle shooting. Rubber friction fit anti-rattle design prevents movement on Buffer Tube. Shielded operation Lever. Multiple swivelsleeve and Sling Mounts. This kit includes HOGUE 6 Position Butt Stock with Buffer Tube, Buffer Plate, Castle Nut, Buffer Spring and Buffer. Available in Black of Desert Tan and Dark Green.

  • 6 Position Butt Stock
  • Mil-Spec Buffer Tube
  • Carbine Buffer and Spring
  • Back Plate and Castle Nut
  • Available in Black, Tan or ODG

Our Price: $79.95
Enhanced AR15 Lower Parts Kit

Our Enhanced Lower Parts Kit provides better Trigger Control, Safety Engagement /Disengagement and Bolt Catch Lock/Release. Hammer and Trigger have been Polished at Contact points which provides Smoother Operation. Ambidextrous Safety enables easier Engagement and Disengagement of Safety. Bolt Catch has Extended contact points allowing for better Control of Bolt Catch Release/Lock. Kit includes everything needed to assemble your striped AR15 Lower Receiver.

Proudly Made in the USA.

  • Polisher Hammer and Trigger
  • Extended Bolt Catch
  • Ambidextrous Safety Selector
  • Trigger Sear and Spring
  • Hammer/Trigger Springs and Pins
  • Bolt Catch Release Plunger, Spring and Roll Pin
  • Safety Selector Spring and Detent
  • Magazine Catch, Catch Button and Spring
  • Front and Rear Take Down Pins
  • Take Down Detents and Springs
  • Trigger Guard and Roll Pin
  • Buffer Retainer and Spring
  • A2 Pistol Grip

Our Price: $89.95
223/5.56/Blackout Bolt Carrier Group w/Charge Handle

5.56/223/Blackout Bolt and Carrier Group with Mil-Spec Charge Handle. Includes Bolt, Bolt Carrier, Cam Pin. Extractor and Firing Pin.

  • Bolt Carrier Machined from 9310 Steel
  • Nitrite Treated Bolt Carrier
  • Chrome Lined Gas Key
  • Torqued and Staked Gas Key
  • Bolt is Machined from 9310 Steel
  • MPI Tested Bolt
  • Chrome Firing Pin
  • Mil-Spec Charge Handle
  • Charge Handle Machined from 6061 Aluminum
  • Hard Coat Anodized Finish

Our Price: $92.50
AR15 6.8SPC ll 16" Barrel

The 6.8 SPC was originally designed for Army Special Forces. Its primary use was to deliver a more Lethal Impact from the AR15 Platform. The original Design has been Modified with an Improved Chamber Design. It was re-branded as a 6.8 SPC ll. The 6.8 SPC ll is an excellent choice for Varmint, Medium Size Game and Target.

All Barrels are Drilled, Reamed and Rifled on CNC Machines. Barrels are then Heat treated, Stress Relieved and Trued. All Barrels are Quality Inspected using CMMs and Precision Air Gauged. .
Barrels are Proudly Manufactured in the USA

  • 6.8 SPC ll
  • 16" Barrel
  • Machined from 4150 Gun Quality Steel
  • M4 Barrel Profile
  • 1-10 Twist
  • 1/2x36 Muzzle Thread
  • Carbine Gas System
  • .0.750 Gas Block
  • 0.074 Gas Port

Our Price: $94.50
AR15 223 Wylde 10.5" 5.56/223 Stainless Steel Barrel

The 10.5" 223 Wylde is a great choice if your considering either a AR Pistol or SBR. In either platform the 10.5" Wylde makes a perfect solution for Home Defense, Truck Gun or Varmint. Bullet Velocity is reduced as a result of the Shortened Barrel. Its versatility makes it a good choice to own.

All Barrels are Drilled, Reamer and Rifled on CNC Machines. Barrels are then Heat Treated, Stress Relieved and Trued. All Barrels are Quality Inspected using CMMs and Precision Air Gauged.
Barrels are Proudly Manufactured in the USA

  • 223 Wylde-
  • 10.5" Barrel
  • Machined from 416R Stainless Steel
  • Heavy Barrel Profile
  • 1.7 Twist
  • 1/2x24 Muzzle Thread
  • Carbine Gas System
  • 0.0750 Gas Block
  • 0.086 Gas Port
  • 5.56 Feed Ramps
  • We recommend using a Adjustable Gas Block on all AR Pistol or SBR Builds.

Our Price: $95.50
AR15 10.5" 300 Blackout Barrel

The 10.5" 300 Blackout is a Great Barrel if you are considering a AR Pistol or SBR. In either platform the 10.5" 300 Blackout is a perfect solution for Home Defense, Truck Gun or Varmint. Bullet Velocity is reduced as a result of the shortened Barrel. Its Versatility makes it a good choice to own.

All Barrels are Drilled, Reamed and Rifled using CNC Machines. Barrels are then Heat Treated, Stress Relieved and Trued. All Barrels are Quality Control Inspected using CMMs, and Precision Air Gauged.
Barrels are Proudly Manufactured in the USA

  • 300 Blackout
  • 10.5" Barrel
  • Machined from 4150 Gun Quality Steel
  • Heavy Barrel Profile
  • 1-7 Twist
  • 5/8x24 Muzzle Thread
  • Pistol Gas System
  • 0.750 Gas Block
  • 0.125 Gas Port
  • 300 Blackout Feed Ramps
  • Parkerized Finish
  • We recommend using an Adjustable Gas Block with All AR Pistol or SBR Builds

Our Price: $95.50
223 Wylde 16" Carbine Nitrite Barrel

The .223 Wllde offers a Improved AR15 5.56 NATO and .223 Remington Chamber Design. The improved version allows Safe Operation of both 5.56 NATO and .223 Remington Ammunition. The .223 Wtlde Chamber Design is known for extreme accuracy. If your considering a 5.56 or .223 Remington you may want to give the .223 Wylde a closer look. We use this Barrel on the Patriot Arms Sportsman AR15.

All Barrels are Drilled, Reamed and Rifled on CNC Machines. Barrels are then Heat Treated, Stress Relieved and Trued. All Barrels are Quality Inspected using CMMs and Precision Air Gauged.
Barrels are Proudly Manufactured in the USA

  • 223 WYLDE
  • 16" Barrel
  • Machined from Gun Quality 4150 Steel
  • Heavy Barrel Profile
  • Nitrite Treated
  • 1-8 Twist
  • Carbine Gas System
  • 0.750 Gas Block
  • 0.072 Gas Port
  • 5.56 NATO Feed Ramps
  • 1/2x24 Muzzle Thread

Our Price: $97.50
AR15 6.5 Grendel Type ll 16" Barrel

The 6.5 Grendel is a very Versatile Cartridge. It is most effective in Bullet Weights for 95 to 129 Grain. The 6.5 Grendel is perfectly suited for Hunting Varmint, Medium Size Game or Long Range Target. The 6.5 Grendel Bullet travels Flat and Fast. Don't let the Light Weight 16" Barrel fool you. The 6.5 Grendel is capable of Take Down at just under 500 Yards.

All Barrels are Drilled, Reamed and Rifled on CNC Machines. Barrels are then Heat treated, Stress Relieved and Trued. All Barrels are Quality Inspected using CMMs and Precision Air Gauged.
Barrels are Proudly Manufactured in the USA

  • 6.5 Grendel Type ll
  • 16" Barrel
  • Machined from 4150 Gun Quality Steel
  • M4 Barrel Pattern
  • Parkerized Finish
  • 1.8 Twist
  • 5/8x24 Muzzle Thread
  • Carbine Gas System
  • 0.750 Gas Block Diameter
  • 0.070 Gas Port Diameter
  • 300 Blackout Feed Ramps

Our Price: $99.95