Home > AR COMPONENTS > LOWER RECEIVER PARTS
Sort By:
Page of 1
AR15 A2 Pistol Grip

Mil-Spec Pistol Grip. Available in Black or Desert Tan

Our Price: $4.95
AR15 Enhanced Pistol Grip

Mil-Spec Pistol Grip with Storage Compartment in base of Grip.  Available in Black of Desert Tan.

Our Price: $9.95
JP Enterprises Hammer, Trigger and Dis-connector Spring Set

The JP Enterprises Spring Set is the least expensive way to enhance your AR Platform and move it closer to professional level. This is the easiest way to smooth out the roll-off of your trigger set-up. Each spring in the Spring Set is evaluated and matched to ensure optimum performance. The Spring Set includes Hammer, Trigger and Dis-Connector Springs. Spring Sets are offered in 4 different trigger pull weights. Please specify the trigger pull weight needed.

  • 3.0 - 3.5 lbs - JPS3.5
  • 3.5 - 4.0 lbs - JPS3.5T
  • 4.0 - 4.5 lbs - JPS4.0
  • 4.5 lbs - JPS4.5

Our Price: $13.95
AR15 Hogue 15 Degree Vertical Polymer Pistol Grip

Since 1968 Hogue has manufacturered everything from handgun grips, long gun stocks , AR components, specialty knives to gear and accessories. All share the same quality: Fit, function, superior performance and world-class design are hallmarks of the Hogue name.

Hogue 15 Degree Vertical Polymer Grip is the lightest AR pistol grip available weighing a mere 1.6 oz. The grip has a hollow interior for lightweight efficiency. It is molded from durable polymer to provide many years of dependable service.

  • COBBLESTONE texture is an efficient non-slip, non-irritating stippling pattern
  • 15 degree angle provides and effortless positioned grip advantage in close quarter situations that require the rifle to be square with the chest and for elbows to be tight to the body, forcing the hand into a sharper angle
  • Recessed dish surface behind the trigger heightens comfort and creates a smooth transition for the finger to the trigger
  • Easy installation
  • Lightest AR pistol grip, weighing a mere 1.6 oz.
  • Material: Polymer
  • Available in Black or FDE

Our Price: $16.95
Enhanced Ambi Safety Selector

The Ambi Safety Selector can be installed on any standard AR15 Lower Receiver. The Safety Selector can be deployed on either Right or Left side of the Rifle. The Right Side lever has been shortened to accommodate right-Handed shooters. .

Our Price: $19.95
AR15 Hogue Pistol Grip

Hogue rubber grips are molded from durable synthetic rubber that is neither spongy nor tacky yet provides a soft recoil absorbing feel, without affecting accuracy. This modern rubber requires a completely different molding process than ordinary neoprene, which results in a superior grip. The flexibility of our materials and molding process has allowed us to produce rubber grips with features that outperform all other makes. Options available: with or without finger grooves, with CMS storage kit/Samson field and beavertail option.Hogue AR15 Overmolded Rubber Grip with Finger Grooves.

Our Price: $24.95
AR15 Ergo Pistol Grip

The Original Ergo Grip, designed for performance creates a better interface between the shooter and firearm. The Ergo Grip is still the standard by which positive grip and shooter comfort are measured. The Ergo Grip comes with the patented Gapper™ for increased comfort.Mil-Spec Pistol Grip.

Our Price: $24.95
Mil-Spec Buffer Tube Kit

The AR15 Mil-Spec Buffer Kit includes all components needed to install on a Ar15 Lower Receiver. Buffer Tube is constructed from Aircraft Grade Aluminum and Finished with Hard Coat Anodizing. Buffer Tube Threads are Rolled for added strength. Supplied with Standard Buffer Spring, 3oz Buffer, Castle Nut and End Plate. This Buffer Kit will fit any AR15 Lower Receiver. It is also compatible with most AR10 Rifles but may require a modified Buffer and Buffer Spring for proper operation.

  • Aircraft Aluminum Construction
  • 6 Position Mil-Spec Carbine Buffer Tube
  • 3oz Carbine Buffer
  • Steel Castle Nut
  • Steel End Plate
  • Hard Coat Anodized

Our Price: $29.95
Anti-Rotation Hammer/Trigger Pin Set

Anti Rotation Locking Cam Pins. Replaces Standard Hammer and Trigger Pins with Anti Rotation and Locked Pins. All components supplied for easy installation. Proudly Made in the USA.

Our Price: $29.95
Gen II Mil-Spec Butt Stock Kit

Complete 6 Position Butt Stock with Buffer Tube, Butt Plate, Castle Nut, Buffer Spring and Buffer. Removable and 2 Point Adjustable Sling Mount.  Available in Black of Desert Tan.

Our Price: $39.95
ar15 butt stock AR15 Mil-Spec Socom Butt Stock Kit

Our Mil-Spec SOCOM Design has a Widened Cheek Area which provides Stability when Sighting in. The Rubber Butt Pad adds comfort from Recoil. There are also Sealed/Removable Storage Tubes in the Butt Stock.

  • 6 Position SOCOM Butt Stock
  • Widened Cheek Rest
  • Rubber Butt Pad
  • Mil-Spec Carbine Buffer and Buffer Tube
  • Back Plate and Castle Nut
  • Sealed Storage Tubes in Butt Stock
  • Available in Black or Tan

Our Price: $49.95
AR15 Lower Parts Kit with Stainless Steel Hammer and Trigger

We have updated our Lower Parts Kits to 3 versions. Our Lower Parts Kits come complete and ready to install. This Mil-Spec version includes Stainless Steel Hammer and Trigger with A2 Pistol Grip.
  • Stainless Steel Hammer and Trigger
  • Dis-connector and Spring
  • Hammer and Trigger Springs
  • Trigger and Hammed Pins
  • Buffer Retainer Pin and Retainer Spring
  • Trigger Guard and Roll Pin
  • Bolt Catch, Spring and Roll Pin
  • Magazine Catch, Spring and Release Button
  • Safety Selector, Detent and Spring
  • Front and Rear Take Down Pin, Detent and Spring
  • A2 Grip Available in Black or Desert Tan.

Our Price: $49.95
LUTH-AR Cheek Plate Assembly

The LUTH Cheek Plate Assembly adapts to the MBA-4 Carbine Stock. This assembly will add up to 1 inch height to the Cheek Rest. Made of a Glass-Filled Nylon for added strength. We use the LUTH MBA-4 Butt Stock with Cheek Plate Assembly on our VARMINT Platform.

Complete Cheek Plate Assembly to add on to your MBA-2 or MBA-4 stock for extra rise to the top of your stock includes:

  • 1 Cheek Plate – RL-005
  • 1 Lockplate – RL-010
  • 1 Steel Thumb Screw – TS-01
  • 1 Thumb Screw Hex Nut 1/4-20 Black – HN-01
  • 1 Thumb Screw Star Lock Washer – TSW-01
  • 1 MBA-1/2 Side Plate – RL-0011
  • 1 MBA-3/4 Side Plate
  • 2 Side Plate Button Head Cap Screws 8-32×3/4 – SCW-02
  • 2 Side plate/Stop Nut Nyloc Nut 8-32 Black – HN-02
  • Available in Black, FDE and Pink

Our Price: $59.95
LUTH AR MBA-4 Carbine Butt Stock

The MBA-4 Carbine Stock is a revolutionary designed stock. Fully adjustable coupled with Light Weight and affordability. Made of a Glass-Filled Nylon for added strength. The LUTH MBE-4 will work with either Mil-Spec or Commercial 6 position Buffer Tubes. The MBA-4 can be upgraded with Cheek Plate and Butt Plate Assembly. Available in Black of FDE. Please email us for additional information. We use LUTH MBE-4 Butt Stocks on our VARMINT AR15 Rifle.

  • Light weight stock to mount to a carbine rifle (6-positions mil-spec or commercial tube) – This is our carbine skullaton stock
  • Fits all .223 and most .308 AR carbine style rifles
  • Super Strong Glass Filled Nylon
  • 21st century look
  • Ergonomic
  • Easy to replace and quick to install
  • Uses 4 out of the 6 positions on a mil-spec or commercial tube

Our Price: $66.75
AR15 Lower Parts Kit with Nickel Boron Hammer, Trigger and Detent

We have updated out Lower Parts Kits to 3 versions. All kits come complete and ready to install. This Mil-Spec version includes Nickel Boron Hammer,Trigger and Dis-connector with A2 Pistol Grip.
  • Nickel Boron Hammer and Trigger
  • Nickel Boron Dis-connector and Spring
  • Hammer and Trigger Springs
  • Trigger and Hammed Pins
  • Buffer Retainer Pin and Retainer Spring
  • Trigger Guard and Roll Pin
  • Bolt Catch, Spring and Roll Pin
  • Magazine Catch, Spring and Release Button
  • Safety Selector, Detent and Spring
  • Front and Rear Take Down Pin, Detent and Spring
  • A2 Grip Available in Black or Desert Tan.

Our Price: $69.95
AR15 Lower Parts Kit with Polished Hammer and Trigger

We have updated our Lower Parts Kits to 4 versions. Each Lower Parts Kit comes complete and ready to install. This Mil-Spec version includes Polished Hammer and Trigger Contact areas. This kit provides a smooth crisp trigger pull. Kit includes A2 Pistol Grip.
  • Polisher Hammer and Trigger
  • Dis-connector and Spring
  • Hammer and Trigger Springs
  • Trigger and Hammed Pins
  • Buffer Retainer Pin and Retainer Spring
  • Trigger Guard and Roll Pin
  • Bolt Catch, Spring and Roll Pin
  • Magazine Catch, Spring and Release Button
  • Safety Selector, Detent and Spring
  • Front and Rear Take Down Pin, Detent and Spring
  • A2 Grip Available in Black or Desert Tan.

Our Price: $69.95
Hogue Butt Stock with Buffer Kit

HOGUE Rubber OverMolded Butt Stock Kit. Reinforced polymer construction with OverMold rubber cheek rest. Robber/polymer hybrid Butt Pad provides snag-free rifle shooting. Rubber friction fit anti-rattle design prevents movement on Buffer Tube. Shielded operation Lever. Multiple swivelsleeve and Sling Mounts. This kit includes HOGUE 6 Position Butt Stock with Buffer Tube, Buffer Plate, Castle Nut, Buffer Spring and Buffer. Available in Black of Desert Tan and Dark Green.

  • 6 Position Butt Stock
  • Mil-Spec Buffer Tube
  • Carbine Buffer and Spring
  • Back Plate and Castle Nut
  • Available in Black, Tan or ODG

Our Price: $79.95
Enhanced AR15 Lower Parts Kit

Our Enhanced Lower Parts Kit provides better Trigger Control, Safety Engagement /Disengagement and Bolt Catch Lock/Release. Hammer and Trigger have been Polished at Contact points which provides Smoother Operation. Ambidextrous Safety enables easier Engagement and Disengagement of Safety. Bolt Catch has Extended contact points allowing for better Control of Bolt Catch Release/Lock. Kit includes everything needed to assemble your striped AR15 Lower Receiver.

Proudly Made in the USA.

  • Polisher Hammer and Trigger
  • Extended Bolt Catch
  • Ambidextrous Safety Selector
  • Trigger Sear and Spring
  • Hammer/Trigger Springs and Pins
  • Bolt Catch Release Plunger, Spring and Roll Pin
  • Safety Selector Spring and Detent
  • Magazine Catch, Catch Button and Spring
  • Front and Rear Take Down Pins
  • Take Down Detents and Springs
  • Trigger Guard and Roll Pin
  • Buffer Retainer and Spring
  • A2 Pistol Grip

Our Price: $89.95
JP Enterprises Gen ll "Standard Mass" Silent Captured Buffer Spring Assembly

The “spoon over a cheese grater” sound emitted by modern sporting rifles whenever they’re charged or fired has always been one of the AR platform’s ugly blemishes and one we’ve worked ardently to eliminate. After years of specially selecting buffer tube manufacturers based on the quality of their tubes’ interior finish, JP Enterprises opted to design and produce their own action springs with a perfect centerless-ground and precision-polished outside diameter. These JP Custom Buffer Springs are an inexpensive way to see exactly why we have a reputation for having the quietest, smoothest rifles on the market.
JP Enterprises pursuit of perfection didn’t stop with springs though and led ultimately to the creation of the patented Silent Captured Spring in 2012. Maintaining all the benefits of their polished buffer springs and proprietary LMOS™ buffer, this combination buffer-spring assembly eliminates the friction of standard buffer components resulting in outstanding smoothness and sound abatement. What’s more, the spring is removable from the assembly for custom tuning, and both the AR-15 and AR-10 versions of the JP Silent Captured Springs are functional in rifle- and carbine-length operating systems. The AR-15 version fits and functions in any gas-operated AR-15 variant, regardless of caliber and the AR-10 version should fit and function in any large-frame AR-10-type platform. The JPSCS is not compatible with any 9mm AR variant or any blowback system using a solid (weighted) carrier.
  • Standard Mass Silent Captured Buffer Spring Assembly
  • New aluminum guide rod cuts overall weight
  • Heavier masses translate to more buffering mass and less chance of bolt bounce
  • Full correspondence between SCS masses and H1, H2 and H3 buffers
  • Interchangeable buffers allow conversion between AR-15 and AR-10 models (and vice versa)

Our Price: $139.95
LUTH-AR MBA-3 Carbine Butt Stock

The MBA-3 Carbine Stock is a revolutionary designed stock. Fully adjustable Butt Plate and Cheek Rest coupled with Light Weight and affordability. Made of a Glass-Filled Nylon for added strength. Cheek Rest has an additional 1 inch of Height Adjustment. The Butt Plate has an additional 1 1/16 inch of Length adjustment. The Butt Plate also a 3-axis adjustment which allows for perfect fit to the Shoulder. The LUTH MBE- 3 will work with either Mil-Spec or Commercial 6 position Buffer Tubes. Buffer Tube Kit sold separatly. We use LUTH MBE-3 Butt Stocks on our GRENDEL Platform.

  • Fully Adjustable Carbine Buttstock assembly to mount to a carbine rifle (6-positions mil-spec or commercial tube) – This is our carbine stock
  • Additional 1″ height on cheek rest
  • 3-axis Adjustable Butt Plate Assembly extends additional 1 1/16″ length of pull and includes the following movement:
  • Horizontal for linear adjustment (i.e. length of pull)
  • Vertical for a perfect butt plate fit into the curvature of the shoulder.
  • Lateral adjustment for a ½ inch left or right cast
  • Includes a Picatinny Rail on the bottom rear of the Stock Body to attach your choice of many accessories.
  • Designed a flat bottom index set screw (10-24) to eliminate that constant rattle of carbine collapsible buttstock. This also allows you to secure the stock in your favorite position.
  • The Black MBA-3 comes with a medium soft rubber recoil pad, Duro 85.
  • The FDE MBA-3 comes with a FDE hard butt plate as a pad. A Black medium soft rubber recoil pad is available for additional purchase.
  • The Luth-AR MBA-3 weighs roughly half that of comparable stocks coming in at just 18.5 ounces.
  • Fits all .223 and most .308 AR carbine style rifles
  • Super Strong Glass Filled Nylon
  • Easy to replace and quick to install
  • Uses 4 out of the 6 positions on a mil-spec or commercial tube

Our Price: $150.95
3 LB Velocity Drop in Trigger - Curved Trigger

The Velocity Triggers AR-15 Drop in Trigger Curved 3LB is a true drop in trigger replacement for your standard AR15 style weapon. The Velocity Triggers AR-15 Drop in Trigger Curved 3LB is steel with DLC coating that prevents rust and inhibits corrosion. The DLC coating on the Velocity Triggers AR-15 Drop in Trigger Curved 3LB also gives the trigger an exceptionally dark black finish and improves feel with the natural lubricity. Curved Trigger Version of 3 LB Velocity Drop in Trigger. Velocity Triggers offer EDM Wire Technology. Tool Steel, Heat Treated and NP3 Robar Treated Trigger, Hammer and Disconnect. Anodized T6065 Billet Aluminum Housing.
Velocity triggers are Made in the USA.

  • Drop in trigger system
  • Single Stage
  • Cannot be used with 9mm Conversion or open bolt face weapons
  • Rust and corrosion resistant
  • Deep black trigger

Our Price: $150.95
3 LB Velocity Drop in Trigger - Straight Trigger

The Velocity Triggers AR-15 Drop in Trigger Straight 3LB is a true drop in trigger replacement for your standard AR15 style weapon. The Velocity Triggers AR-15 Drop in Trigger Straight 3LB is steel with DLC coating that prevents rust and inhibits corrosion. The DLC coating on the Velocity Triggers AR-15 Drop in Trigger Straight 3LB also gives the trigger an exceptionally dark black finish and improves feel with the natural lubricity.
Velocity triggers are Made in the USA.

  • Drop in trigger system
  • Single Stage
  • Cannot be used with 9mm Conversion or open bolt weapons
  • Rust and corrosion resistant
  • Deep black trigger

Our Price: $150.95
4 LB Velocity Drop in Trigger - Curved Trigger

The Velocity Triggers AR-15 Drop in Trigger Curved 4LB For Steel Cased Ammo is a true drop in trigger replacement for your standard AR15 style weapon. The Velocity Triggers AR-15 Drop in Trigger Curved 4LB For Steel Cased Ammo is steel with DLC coating that prevents rust and inhibits corrosion. The DLC coating on the Velocity Triggers AR-15 Drop in Trigger Curved 4LB For Steel Cased Ammo also gives the trigger an exceptionally dark black finish and improves feel with the natural lubricity.
Velocity
triggers are Made in the USA.

  • Drop in trigger system
  • Works well with steel cased ammo and .22LR
  • Single Stage
  • Cannot be used with 9mm Conversion or open bolt face weapons
  • Rust and corrosion resistant
  • Deep black trigger

Our Price: $150.95
JP Enterprises Gen ll "Heavy Tungsten Mass" Silent Captured Buffer Spring Assembly

The “spoon over a cheese grater” sound emitted by modern sporting rifles whenever they’re charged or fired has always been one of the AR platform’s ugly blemishes and one we’ve worked ardently to eliminate. After years of specially selecting buffer tube manufacturers based on the quality of their tubes’ interior finish, JP Enterprises opted to design and produce their own action springs with a perfect centerless-ground and precision-polished outside diameter. These JP Custom Buffer Springs are an inexpensive way to see exactly why we have a reputation for having the quietest, smoothest rifles on the market.
JP Enterprises pursuit of perfection didn’t stop with springs though and led ultimately to the creation of the patented Silent Captured Spring in 2012. Maintaining all the benefits of their polished buffer springs and proprietary LMOS™ buffer, this combination buffer-spring assembly eliminates the friction of standard buffer components resulting in outstanding smoothness and sound abatement. What’s more, the spring is removable from the assembly for custom tuning, and both the AR-15 and AR-10 versions of the JP Silent Captured Springs are functional in rifle- and carbine-length operating systems. The AR-15 version fits and functions in any gas-operated AR-15 variant, regardless of caliber and the AR-10 version should fit and function in any large-frame AR-10-type platform. The JPSCS is not compatible with any 9mm AR variant or any blowback system using a solid (weighted) carrier.
  • Heavy Tungsten Mass Silent Captured Buffer Spring Assembly
  • New aluminum guide rod cuts overall weight
  • Heavier masses translate to more buffering mass and less chance of bolt bounce
  • Full correspondence between SCS masses and H1, H2 and H3 buffers
  • Interchangeable buffers allow conversion between AR-15 and AR-10 models (and vice versa)

Our Price: $176.95
JP Enterprises Gen ll AR10 "Heavy Tungsten Mass" Silent Captured Buffer Spring Assembly

The “spoon over a cheese grater” sound emitted by modern sporting rifles whenever they’re charged or fired has always been one of the AR platform’s ugly blemishes and one we’ve worked ardently to eliminate. After years of specially selecting buffer tube manufacturers based on the quality of their tubes’ interior finish, JP Enterprises opted to design and produce their own action springs with a perfect centerless-ground and precision-polished outside diameter. These JP Custom Buffer Springs are an inexpensive way to see exactly why we have a reputation for having the quietest, smoothest rifles on the market.
JP Enterprises pursuit of perfection didn’t stop with springs though and led ultimately to the creation of the patented Silent Captured Spring in 2012. Maintaining all the benefits of their polished buffer springs and proprietary LMOS™ buffer, this combination buffer-spring assembly eliminates the friction of standard buffer components resulting in outstanding smoothness and sound abatement. What’s more, the spring is removable from the assembly for custom tuning, and both the AR-15 and AR-10 versions of the JP Silent Captured Springs are functional in rifle- and carbine-length operating systems. The AR-15 version fits and functions in any gas-operated AR-15 variant, regardless of caliber and the AR-10 version should fit and function in any large-frame AR-10-type platform. The JPSCS is not compatible with any 9mm AR variant or any blowback system using a solid (weighted) carrier.
  • AR10 Heavy Tungsten Mass Silent Captured Buffer Spring Assembly
  • New aluminum guide rod cuts overall weight
  • Heavier masses translate to more buffering mass and less chance of bolt bounce
  • Full correspondence between SCS masses and H1, H2 and H3 buffers
  • Interchangeable buffers allow conversion between AR-15 and AR-10 models (and vice versa)

Our Price: $206.95