Home > AR COMPONENTS > UPPER RECEIVERS > Receiver Sets
Sort By:
Page of 1
AR15 Anderson Rifle "RAW" Upper and Lower Receiver Set

Anderson AM15 "RAW" Stripped Upper and Lower Receivers are machined from 7075 T6 Aluminum forging. The Upper Receiver features M4 feed ramps, this upper receiver is machined to Military Specifications & Standards and can be used with multiple calibers on the AR-15 platform.


This Upper and Lower Receiver set comes UNFINISHED and ready for the Finish and Color of your choice.


Made in America


FEATURES:


Upper Receiver:


  • Mil Spec, Standard
  • MATERIAL: 7075 T6 Aluminum Forging
  • FINISH: UNFINISHED
  • COMPATIBILITY: All AR15 Calibers, except .458 SOCOM


Lower Receiver:

  • Mil Spec, Multi-Cal Engraved
  • MATERIAL: 7075 T6 Aluminum Forging
  • FINISH: UNFINISHED
  • COMPATIBILITY: All AR15 Calibers
  • Accepts 3/4″ and 1″ Grip Screws

Our Price: $98.00
Aero Precision Upper and Gen ll Lower Receiver Set

Striped Upper and Lower Receiver delivers Custom Shop quality without the typical Custom Shop price. Made from 7075 T6 Aluminum. Mil-Spec Hard Coat Anodized. Precision CNC Machined to ensure drop-in installation of Mil-Spec aftermarket components. Flared Magwell enables faster Manazine changes.

Upper Receiver Features:

  • AR15 Profile
  • CNC Machined from 7075-T6 forged aluminum
  • M4 Feedramps
  • .250” takedown pin holes
  • Compatible with all Mil-Spec AR15 components
Lower Receiver Features:

  • AR15 Profile
  • CNC Machined from 7075-T6 forged aluminum
  • Markings: "Cal Multi"
  • Upper Tension Screw
  • Flared Magwell
  • Rear takedown pin detent hole is threaded for a 4-40 set screw
  • Compatible with all Mil-Spec AR15 components and Magazines

Our Price: $109.95
Aero Precision AR10 Stripped Receiver Set

The Aero Precision M5 Stripped Upper and Lower Receiver Set helps you build a big-bore AR from the ground up. Mil-spec dimensions and coating ensure the highest quality and correct component interface.

First of all, the Aero Precision M5 Stripped Lower Receivers works with standard DPMS 308 components and magazines. Nice! The upper tension screw allows users to fine tune the fit of the upper and lower receiver. This is through the use of a nylon tipped tensioning set screw inserted in the grip tang of the lower receiver. Secondly, the rear takedown pin detent hole is threaded for a 4-40 set screw. Also, M5 stripped lower’s bolt catch is threaded for a screw pin (no roll pin needed) and an integrated trigger guard. Selector markings will work with 45, 60 or 90 degree safety selectors. These lowers accept short throw safety selectors, but will work with any standard selector. Lastly, no gap with aftermarket pistol grips.Aero Precision M5 receivers are engineered to match flawlessly, providing the operator superior performance and accuracy in a durable and dependable platform.
Aero Precision M5 308 Assembled Upper Receiver is hands down one of the best forged 308 upper receivers on the market. Manufactured by Aero Precision right here in the USA. Forged from 7075-T6 aluminum, and precision machined to accept DPMS .308 components. Features include M4 feedramps, .2795 takedown pin holes, laser engraved T-marks, DPMS High Profile (.210 Tang), and a hard coat black anodized finish.

Upper Receiver Features:

  • Platform: M5 (.308)
  • Material: Machined from 7075-T6 forged aluminum
  • Coating: Matte black hard-coat anodized Mil 8625 Type 3 Class 2
  • M4 Feedramps
  • .2795” takedown pin holes (DPMS size)
  • DPMS High Profile (.210) Tang
  • Accepts standard DPMS .308 components
  • Lazer engraved T-mark

Lower Receiver Features:


  • Platform: M5 (.308)
  • Material: Machined from 7075-T6 forged aluminum
  • Coating: Matte black hard-coat anodized Mil 8625 Type 3 Class 2
  • Markings: "Cal Multi"
  • Works with standard DPMS 308 components and magazines
  • Rear takedown pin detent hole is threaded for a 4-40 set screw
  • Bolt catch is threaded for a screw pin (no roll pin needed)
  • Integrated trigger guard
  • Selector markings will work with 45, 60 or 90 degree safety selectors
  • Accepts Battle Arms Development short throw safety selectors, but will work with any standard selector
  • No gap with aftermarket pistol grips

Our Price: $240.00
Aero Precision AR10 FDE Stripped Receiver Set

The Aero Precision M5 FDE Stripped Upper and Lower Receiver Set helps you build a big-bore AR from the ground up. Mil-spec dimensions and coating ensure the highest quality and correct component interface.

First of all, the Aero Precision M5 FDE Stripped Lower Receivers works with standard DPMS 308 components and magazines. Nice! The upper tension screw allows users to fine tune the fit of the upper and lower receiver. This is through the use of a nylon tipped tensioning set screw inserted in the grip tang of the lower receiver. Secondly, the rear takedown pin detent hole is threaded for a 4-40 set screw. Also, M5 stripped lower’s bolt catch is threaded for a screw pin (no roll pin needed) and an integrated trigger guard. Selector markings will work with 45, 60 or 90 degree safety selectors. These lowers accept short throw safety selectors, but will work with any standard selector. Lastly, no gap with aftermarket pistol grips.
Aero Precision M5 receivers are engineered to match flawlessly, providing the operator superior performance and accuracy in a durable and dependable platform.

Aero Precision M5 308 FDE Assembled Upper Receiver is hands down one of the best forged 308 upper receivers on the market. Manufactured by Aero Precision right here in the USA. Forged from 7075-T6 aluminum, and precision machined to accept DPMS .308 components. Features include M4 feedramps, .2795 takedown pin holes, laser engraved T-marks, DPMS High Profile (.210 Tang), and a FDE cerakote finish.
Upper Receiver Features:

  • Platform: M5 (.308)
  • Material: Machined from 7075-T6 forged aluminum
  • Coating: FDE Cerakote Finish
  • M4 Feedramps
  • .2795” takedown pin holes (DPMS size)
  • DPMS High Profile (.210) Tang
  • Accepts standard DPMS .308 components
  • Lazer engraved T-mark
Lower Receiver Features:

  • Platform: M5 (.308)
  • Material: Machined from 7075-T6 forged aluminum
  • Coating: FDE Cerakote Finish
  • Markings: "Cal Multi"
  • Works with standard DPMS 308 components and magazines
  • Rear takedown pin detent hole is threaded for a 4-40 set screw
  • Bolt catch is threaded for a screw pin (no roll pin needed)
  • Integrated trigger guard
  • Selector markings will work with 45, 60 or 90 degree safety selectors
  • Accepts Battle Arms Development short throw safety selectors, but will work with any standard selector
  • No gap with aftermarket pistol grips

Our Price: $275.00
Aero Precision "Mad Dragon" Builders Set

This package deal includes the finished pieces you need to assemble your own Desert MAD Dragon Cerakote M4E1 Rifle, including an M4E1 Enhanced Upper Receiver, AR15 Gen 2 Lower Receiver, Gen 2 Enhanced Handguard of choice and Billet Trigger Guard all finished in Desert MAD Dragon Cerakote. Stand out at the range with a unique and eye catching build. This is a one time offer for this finish - once they are gone, they are gone!


Includes:

  • M4E1 Enhanced Upper Receiver finished in Desert MAD Dragon Cerakote.
  • Upper receiver is assembled and includes the forward assist, dust cover and barrel nut.
  • AR15 Gen 2 Stripped Lower Receiver finished in Desert MAD Dragon Cerakote
  • 15" Enhanced Gen 2 KeyMod finished in Desert MAD Dragon Cerakote
  • Billet Trigger Guard in Desert MAD Dragon Cerakote

Our Price: $295.00
Aero Precision AR15 "US Army" Builders Set

Reminiscent of a WWII era Jeep. This battle worn OD Green Cerakote features the iconic white invasion star on the left side of the set and a USA stencil on the right side. this set looks like it took part in the D-Day invasion on June 6, 1944.

This package deal includes the finished pieces you need to assemble your own Army Cerakote M4E1 Rifle, including an M4E1 Enhanced Upper Receiver, AR15 Gen 2 Lower Receiver, Gen 2 Enhanced Handguard of choice and Billet Trigger Guard all finished in custom Army Cerakote. Stand out at the range with a unique and eye catching build. This is a one time offer for this finish - once they are gone, they are gone!

Includes:
  • Cerakoted by Mad Custom Coatings
  • M4E1 Enhanced Upper Receiver finished in Army Cerakote.
  • Upper Receiver is Assembled and Includes the Forward Assist, Ejection Port Cover and Barrel Nut.
  • 15" Enhanced Gen 2 KeyMod Handguard finished in Army Cerakote
  • Billet Trigger Guard in Army Cerakote
  • AR15 Gen 2 Lower Receiver finished in Army Cerakote

List Price: $449.00
Our Price: $449.00